SPE Series DC Power Supply

SPE 500W

Output Power
500W
Output Voltage
0 - 80V
Output Current
0 - 20A
Channel
1CH

Apply for Trial

Datasheet

Videos

SPE 500W

Compact and portable design for easy carrying
High resolution: 10 mV / 1 mA
List waveform editing and output
Low ripple and noise
Overvoltage and overcurrent protection
Real-time output voltage and current curve monitoring
Intelligent temperature-controlled fan cooling
2.8-inch IPS LCD
Communication interface: USB Device, RS232, RS485, or LAN (select one)

Product Advantages
Model Comparison
Configure Your Instrument
Related Downloads
Related Products

Compact, Portable, and Easy to Use
Delivers 500 W in a compact form factor, with series output up to 80 V and 20 A. Saves bench space and supports flexible deployment across different test environments.
Constant-Power Output for Flexible Load Matching
Constant-power design enables flexible voltage and current combinations within the rated power, allowing one unit to support a wider range of loads and power requirements.
High-Resolution Control with Stable, Low-Noise Output
Stable, low-ripple and low-noise output supports precision testing. TI C2000 fully digital control and 24-bit high-accuracy ADC sampling on the SPE8104 and SPE8205, combined with rigorous unit calibration, ensure control accuracy and output stability.
Output Curve Monitoring
Monitors voltage and current output curves for a clear view of changing trends. Suitable for smartphone and laptop repair, PCB burn-in testing, and battery charge/discharge experiments.
LIST Sequencing and Quick Parameter Recall

Supports LIST waveform editing with up to 10 voltage, current, and timed-output steps. Four built-in Memory configurations enable quick recall, reducing repetitive setup for batch and cyclic testing.
Multiple Protections
OVP, OCP, and OTP provide comprehensive protection, while CV/CC modes switch automatically according to load conditions. Independent output control and delayed automatic output at power-on improve DUT safety and support unattended testing.
Remote Control for Easy System Integration

USB Device interface with support for PC software and SCPI communication. RS232, RS485, or LAN interfaces are optionally available for automated test system integration and remote control.

Model	Output Power	Output Voltage	Output Current	Resolution	Channel	Interface
SPE6205	500W	0 - 60V	0 - 20A	10mV/1mA	1	USB Device/RS232/RS485/LAN port(select one)
SPE8105	500W	0 - 80V	0 - 10A	10mV/1mA	1
SPE8205	500W	0 - 80V	0 - 20A	10mV/1mA	1

General Accessories
Name Order Number
Quick Guide ————
Power Cord ————
USB Cable 7ULD10
Application Notes & Datasheet
User Manual for SPE6205,8105,8205 Power Supply
2026-09-17
Programming manual for SP SPE SPS Series DC Power Supply
2026-09-17
Software, Firmware & Others
PC software for SPE series Power Supply(SPE6205,8105,8205)
2026-09-17