SPE Series 150W-300W DC Power Supply

SPE

Output Power
150W - 300W
Output Voltage
0 - 60V
Output Current
0 - 10A
Channel
1CH

Apply for Trial

Datasheet

Videos

SPE

Compact and portable design for easy carrying.
High resolution: 10 mV / 1 mA.
List waveform editing and output with up to 10 programmable timing sequences.
Low ripple and noise.
Overvoltage and overcurrent protection.
Real-time output voltage and current curve monitoring.
Intelligent temperature-controlled fan cooling.
2.8-inch TFT LCD display.
USB communication interface with SCPI support.

Product Advantages
Model Comparison
Configure Your Instrument
Related Downloads
Related Products

Compact, Portable, and Easy to Use
Delivers 150 W-300 W in a compact form factor, with series output up to 60 V and 10 A. Saves bench space and supports flexible deployment across different test environments.
Constant-Power Output for Flexible Load Matching
Constant-power design enables flexible voltage and current combinations within the rated power, allowing one unit to support a wider range of loads and power requirements.
High-Resolution Control with Stable, Low-Noise Output
Stable, low-ripple and low-noise output supports precision testing. TI C2000 fully digital control and 24-bit high-accuracy ADC sampling on the SPE8104 and SPE8205, combined with rigorous unit calibration, ensure control accuracy and output stability.
Output Curve Monitoring
Monitors voltage and current output curves for a clear view of changing trends. Suitable for smartphone and laptop repair, PCB burn-in testing, and battery charge/discharge experiments.
LIST Sequencing and Quick Parameter Recall

Supports LIST waveform editing with up to 10 voltage, current, and timed-output steps. Four built-in Memory configurations enable quick recall, reducing repetitive setup for batch and cyclic testing.
Multiple Protections
OVP, OCP, and OTP provide comprehensive protection, while CV/CC modes switch automatically according to load conditions. Independent output control and delayed automatic output at power-on improve DUT safety and support unattended testing.
Remote Control and Front USB Interface for System Integration

All models feature a USB Device interface and a front USB port. The USB Device interface supports PC software and SCPI communication, while the front USB port provides either 5 V/1 A output or up to 18 W fast charging, depending on the model.

Model	Output Power	Output Voltage	Output Current	Resolution	Channel	Interface
SPE3051	150W	0 - 30V	0 - 5A	10mV/1mA	1	USB Device/USB port port
SPE3102	200W	0 - 30V	0 - 10A	10mV/1mA	1
SPE6102	200W	0 - 60V	0 - 10A	10mV/1mA	1
SPE6053	300W	0 - 60V	0 - 5A	10mV/1mA	1
SPE3103	300W	0 - 30V	0 - 10A	10mV/1mA	1
SPE6103	300W	0 - 60V	0 - 10A	10mV/1mA	1

General Accessories
Name Order Number
Quick Guide ————
Power Cord ————
USB Cable 7ULD10
Application Notes & Datasheet
User manual for SPE Series Single Output Power Supply
2026-09-17
Programming manual for SP&SPE&SPS Series DC Power Supply
2026-09-17
Software, Firmware & Others
PC software for OWON SP&SPE&SPS Series Power Supply
2026-09-17