AI
OWH6546 Series High Voltage Programmable DC Power
OWH6546
-
Output Power
18kW -
Output Voltage
0 - 1200V -
Output Current
0 - 30A -
P-V Function
Optional
OWH6546
- 6U standard rack-mount design, fully compatible with 19-inch racks
- Designed for high-voltage, high-power applications (18kW/1200V/30A, three-phase input), delivering 0.05% ultra-high precision control for long-term stability and low thermal drift
- 10mV / 1mA setting and readback resolution
- Selectable CV/CC priority mode to flexibly adapt to different load characteristics
- Supports up to 100-step LIST sequence programming and PC remote control
- Built-in P-V curve simulation to accurately simulate solar panel I-V characteristics
- Fully digital control with integrated OVP, OCP, and OPP protections
- Standard USB Device, RS485, and LAN interfaces; SCPI compatible
- 3.9-inch TFT color display for real-time viewing of dynamic waveforms and test parameters
- Product Advantages
- Model Comparison
- Configure Your Instrument
- Related Downloads
- Related Products
-
18 kW High-Voltage Output
The standard 6U chassis fits seamlessly into 19-inch racks. A single unit delivers 1200 V/30 A/18 kW wide-range output, with 0.05% voltage/current setting accuracy and 10 mV/1 mA setting and readback resolution for stable, precise DC output.
Real-Time Waveforms and Extended Data Logging
Switch to real-time voltage and current waveforms with one touch for a clear view of output dynamics. USB screenshot capture and local data logging enable anomaly monitoring for up to 72 hours, simplifying result storage and troubleshooting.
Flexible CC/CV Priority Modes
Select constant-voltage or constant-current priority to suit different loads and suppress startup overshoot. Adjustable voltage and current slew rates support complex loads and demanding slew-rate tests.
100-Step Sequencing and Dynamic Monitoring
The LIST function supports up to 100 programmable output steps, configured from the front panel, PC software, or a CSV file imported via USB. Real-time voltage and current waveforms make output dynamics easy to monitor and anomalies quick to identify.
Professional PV P-V Curve Simulation
Optional P-V curve simulation reproduces solar panel I-V characteristics under different environmental conditions. Built-in EN 50530 and Sandia models support static MPPT efficiency testing and coordinated control of multiple power supplies.
Versatile Interfaces for Easy System Integration
Standard USB Device, RS485, and LAN interfaces support SCPI commands. The PC software enables remote monitoring, parameter configuration, and data logging. Also provided are a front-panel USB Host port, remote-sense terminals, DC output terminals, and AC input terminals.
-
Model Output Power Output Voltage Output Current P-V Function Interface
Size
OWH6546 18kW 0 - 1200V 0 - 30A Optional USB/RS485/LAN port
6U
OWH6546A 12kW 0 - 1200V 0 - 20A Optional 6U
-
General Accessories
Name Order Number Quick Guide ———— Power Cord 7Power-1 Data Cable 7ULD10 Pluggable Terminal 7Term-1 Copper Shorting Bar 7Short-1 -
Application Notes & Datasheet
2026-09-18
2026-09-18
2026-09-18
2026-09-18
Software, Firmware & Others
2026-09-18
Product Category
-
Digital Multimeter
-
Waveform Generator
-
Smart Meter
-
Electronics Load
-
Power Meter
-
LCR meter
-
info@owon.com.cn
-
sales & Technical Supply
-
Prototype Application