FDS
- DSO+AG+Power supply + Multi-meter 4-in-1
- Supports edge trigger, slope, pulse width, window, under amplitude, interval, timeout, code type, Nth edge, video trigger, serial bus trigger etc.
- Supports FRA chart testing
- Android based, new experience, more possible
- Supports external HDMI display, mouse and keyboard, facilitating complex editing operations
- Supports configuring multi-media equipment, such as camera, microphone, speaker and headphone jack, expand more teaching methods
- Rich interface: USB host x4, USB device, LAN, HDMI
- 10.4 inch capacitive touch HD display
- Product Advantages
- Model Comparison
- Configure Your Instrument
- Related Downloads
- Related Products
-

Versatile 4-in-1 Hardware Integration
Seamlessly integrates four essential benchtop instruments into a single compact device: a Digital Oscilloscope, a 50 MHz Dual-Channel Arbitrary Waveform Generator, a 4 ½-Digit Multimeter, and a 15W (15V/3A) Constant Power Supply.
12-bit High-Resolution ADC with Proprietary Magnifier
Featuring up to 4,096 quantization levels, it faithfully restores smoother waveforms and micro-variations. Compared with traditional 8-bit (256 levels), precision is enhanced by 16x,allowing easy observation of tiny ripples and noise beneath large background signals. The standard magnifier tool zooms into signal
details in real-time for fast anomaly analysis.

Comprehensive Triggering and Hardware-Based Protocol Decoding
2-CH Hardware Protocol Decoding: UART, I2C, SPI, CAN, LIN);Versatile Triggering: Edge, Video, Pulse Width, Slope, Runt, Window, Timeout, Nth Edge, Logic, and Serial Bus Triggers (RS232/UART, I2C, SPI, CAN, LIN)
Multi multimedia and hardware
expansion optionsBuilt-in microphone and speakers;supports external devices
like mouse and keyboard for better interaction. Optional USB
(WiFi+Bluetooth) module supports FTP,network printers,and
mobile hotspots.

Advanced Waveform Math Functions
Supports basic arithmetic (+, -, x,÷), FFT analysis, advanced mathematical functions, digital filtering, and user-defined custom math operations.
Rich Interfaces & Convenient Secondary Development
Equipped with comprehensive hardware interfaces including HDMI, 1× USB Device, 4× USB Host, Trig Out (P/F), LAN port, and a headphone output. Supports WebControl for remote instrument management and a SCPI command transmit/receive tool for effortless secondary development.


10.4-Inch Multi-Touch Display
Multi-touch capacitive screen provides a smartphone-like intuitive operation. Supports external mouse and keyboard connections for enhanced control and flexibility.
-
Oscilloscope Specification
Model Bandwidth Sample Rate Vertical Resolution Record Length FDS1102A 100MHz 1GS/s Max 14 bits 10M FDS1102 100MHz 1GS/s 8 bits 10M FDS3102 100MHz 2.5GS/s 8 bits 10M FDS3202 200MHz 2.5GS/s 8 bits 10M FDS3302 300MHz 2.5GS/s 8 bits 10M Power Specification
Channel
2
Rated Output(0℃-40℃)
Voltage: 0.1-15V; Current: 0.1-3A; Max Power: 15W
Setting Resolution
10mV / 10mA
Multimeter Specification
Full Scale Reading
4½ digits
Frequency Response
(40 - 1000) Hz
Auto Range
√
Ture rms
√
Measure
oltage, Current, Capacitance, Resistance, Frequency, Duty cycle, Continue,Diode test
Waveform Generator Specification
Max Frequency Output
50MHz (2CH)
Amplitude (HR)
2mVpp - 10Vpp
Waveform Length
8K
Standard Waveforms
Sine wave, square wave, ramp wave, pulse wave, noise
Arbitrary Waveforms
exponential rise, exponential decline, Sin(x)/x, step wave etc 28 build-in waveforms
Modulate type
AM, FM,PM,FSK,SWEEP,BURST
-
General Accessories
Name Order Number Power Cord ———— Quick Guide ———— USB Cable 7ULD10 Probe ———— BNC to alligator clips cable 7B-A10 Multimeter Leads 7MP103 Banana plug to alligator clip cable 7BA2A1 -
Application Notes & Datasheet
2026-09-11
2026-09-11
2026-09-11
Software, Firmware & Others
2026-09-11
Product Category
-
Digital Multimeter
-
Waveform Generator
-
Smart Meter
-
Electronics Load
-
Power Meter
-
LCR meter
AI