ACP Series AC/DC Power Source

ACP

Output Power
2kVA / 3kVA
Output Voltage
0 - 300Vac
Output Current
0-15Arms, 45Apeak
DC Power
±450Vdc；0-10Adc

Apply for Trial

Datasheet

Videos

ACP

2U rack-mount design for standard 19-inch cabinet installation.
Adjustable voltage and frequency output, with voltage range of 0-300Vac and frequency from 40Hz-400Hz.
Adjustable AC/DC output support, 0-300Vac or ±450Vdc for ACP3045 model only.
High crest factor and peak current up to 45A
List Mode for mains simulation and reproduction, with support for transient power interruption simulation.
Surge/Sag mode for grid disturbance simulation, including voltage surge and voltage sag.
Fully configurable 0-360° output start and stop phase angle
Built-in relay control output for reliable electrical isolation.
Full digital control integrated with OVP, OCP, OPP protection.
LAN, RS485, and USB serial communication interfaces, with SCPI and MODBUS protocol support.
3.95-inch display with a clear, intuitive interface for easy operation.

Product Advantages
Model Comparison
Configure Your Instrument
Related Downloads
Related Products

Wide-Range Output for Flexible Power Requirements
Available in 2 kVA and 3 kVA models, with AC output from 0 to 300 V and 40 to 400 Hz. The ACP3045 also supports ±450 V and 0 to 10 A DC output, enabling both AC and DC power testing for R&D validation and production testing.
Surge/Sag Grid Disturbance Simulation
Simulates voltage surges and sags with configurable disturbance amplitude, start angle, angular width, cycle count, and number of consecutive waveform notches, helping validate product immunity and operational reliability.
Built-In Power Measurement
Directly measures apparent power, reactive power, power factor, positive and negative peak current, and current crest factor for quick analysis of DUT input power characteristics.
100-Step LIST Sequencing
Supports up to 100 output steps with voltage, frequency, and loop parameters configured for each step. Edit from the front panel, import a CSV file from a USB drive, or configure sequences through PC software to reproduce complex power scenarios.
Multiple Safety Protections

Supports OVP peak overvoltage, OCP peak overcurrent, OCP_RMS RMS overcurrent, and OPP average-power protection. Protection thresholds and delay times are configurable, while fault codes are automatically logged for quick troubleshooting.
Remote PC Control for Easy Automation Integration
Connect via USB, LAN, or RS485 to remotely set voltage, frequency, and phase, monitor voltage, current, and power in real time, and execute LIST sequences and Surge/Sag tests.

Model	Output Power	Output Voltage	Output Current	Output Frequency	DC Power	Size	Interface
ACP2000	2kVA	0 - 300Vac	0-15Arms, 45Apeak	40 - 400Hz	--	2U	USB Device/USB Host/RS485/LAN port
ACP3000	3kVA	0 - 300Vac	0-15Arms, 45Apeak	40 - 400Hz	--	2U
ACP3045	3kVA	0 - 300Vac	0-15Arms, 45Apeak	40 - 400Hz	±450Vdc；0-10Adc	2U

General Accessories
Name Order Number
Quick Guide ————
Data Cable 7ULD10
16A Power Cord 7Power-1/7Power-4(EU)
AC Terminal Protective Cover 7cover-1
Application Notes & Datasheet
User Manual for ACP2000 and 3000 Series AC Power Source
2026-09-18
Quick Guide for ACP2000 and 3000 Series AC Power Source
2026-09-18
Programming Manual for ACP20&30 Series Power Source
2026-09-18