XSA3000-R Series Real Time Spectrum Analyzer
+ Spectrum Analyzer Frequency Range from 9kHz up to 20GHz
+ Vector Network Analyzer Frequency Range from 100kHz up to 8GHz
+ 100% POI 6.25μs, Dynamic Range 60dB
+ -165 dBm/Hz Displayed Average Noise Level (Typ.)
+-106dBc/Hz.@10 kHz Offset Phase Noise (1 GHz, Typ.)
+ 1Hz Minimum Resolution Bandwidth (RBW)
+ Full Amplitude Accuracy < 0.7dB (Typ.)
+ Preamplifier and Tracking Generator Standard
+ Standard 100 MHz Real Time Analysis Bandwidth
+ Distance to Fault Mode (Standard)
+ Multiple display modes (Probability Density Spectrum, Time Power, 3D, etc.) for multi-dimensional viewing of complex transient signals
+ EMI Measurement Software (Opt.)
+ 10.4 inch Multi-Touch Screen , Mouse and Keyboard supported
+ Web Browser Remote Control on PC and Mobile Terminals and File Operation
+ Communication Interfaces: LAN, USB Device, USB Host
Export
E-mail Us
The specifications apply under the following conditions:
The instrument has been warmed up for at least 30 minutes prior to use.
The instrument is within the calibration cycle and has undergone self-calibration.
|
Model |
XSA3036-R |
XSA3060-R |
XSA3080-R |
XSA3140-R |
XSA3200-R |
|
Spectrum analysis range |
9 kHz~3.6 GHz |
9 kHz~6.0GHz |
9 kHz~8.0GHz |
9 kHz~14.0 GHz |
9 kHz~20.0 GHz |
|
VNA frequency range |
100kHz~3.6GHz |
100kHz~6.0GHz |
100kHz~8.0GHz |
- |
- |
|
Cable and antenna test frequency range |
100kHz~3.6GHz |
100kHz~6.0GHz |
100kHz~8.0GHz |
- |
- |
|
Tracking generator |
100kHz~3.6GHz |
100kHz~6.0GHz |
100kHz~8.0GHz |
- |
- |
|
Resolution bandwidth (RBW) |
1Hz ~ 5MHz |
1Hz ~ 5MHz |
1Hz ~ 5MHz |
1Hz ~ 5MHz |
1Hz ~ 5MHz |
|
Displayed Average Noise Level |
-165 dBm/Hz |
-165 dBm/Hz |
-165 dBm/Hz |
-165 dBm/Hz |
-165 dBm/Hz |
|
SSB phase noise |
<-106 dBc/Hz |
<-106 dBc/Hz |
<-106 dBc/Hz |
<-100 dBc/Hz |
<-100 dBc/Hz |
|
Third-order intercept (TOI) |
+14 dbm |
+14 dbm |
+14 dbm |
+14 dbm |
+14 dbm |
|
Frequency span range |
0 Hz，100 Hz to the maximum frequency of the instrument |
||||
|
Frequency span accuracy |
± span / (number of sweep points - 1) |
||||
|
Marker frequency resolution |
span / (number of display points - 1) |
||||
|
Marker frequency uncertainty |
±[marker reading*reference frequency accuracy+1%*span + 0.5*marker frequency resolution + 1 Hz] |
||||
|
Marker functions |
noise marker, N dB bandwidth, frequency counter |
||||
|
Amplitude accuracy |
< 0.7 dB |
||||
|
Real-time analysis bandwidth |
100MHz |
||||
|
Dynamic range |
60 dB |
||||
|
Minimum signal duration for 100% response |
6.25μs |
||||
|
Real-time spectrum views |
probability density spectrum, waterfall, 3D spectrum, power vs. time |
||||
|
VNA measurement parameters |
vector S11, vector S21 |
No Support |
|||
|
Network analysis dynamic rang |
90 dB |
||||
|
Display modes |
reflection/transmission coefficient, return/insertion loss, phase, group delay, log magnitude, fault location, linear magnitude, real part, imaginary part, VSWR, Smith chart, polar plot |
||||
|
Advanced measurements |
CHP，ACPR，OBW，CNR，Harmonic，Monitor，CCDF，SEM，TOI |
||||
|
Vector signal modulation analysis |
AM，FM，PM |
||||
|
EMI filters (-6 dB) |
200 Hz，9 kHz，120 kHz，1 MHz |
||||
|
Detectors |
positive peak, RMS average, quasi-peak |
||||
|
EMI measurement |
built-in 200+ standard templates and custom templates |
||||
|
Communication interfaces |
LAN，USB Device，USB Host |
||||
|
Remote Control Interface |
SCPI/Labview/IVI based on USB-TMC/VXI-11/Socket |
||||
|
Compatible Software |
NI-MAX，Web Browser，Spectrum Vision software |
||||
|
Display |
10.4-inch multi-touch screen, supports mouse and keyboard |
||||
The accessories subject to final delivery.
-
Power Cord -
CF5509-F N (optional) -
CF6509-F (optional) -
CF5509-M (optional) -
Quick Guide -
CF6509-M (optional) -
USB Cable -
N-BNC Adaptor