Fujian Lilliput Optoelectronics Technology Co.,Ltd
中文(简体)  中文(繁体)  日本語  
Home / Products / ads3000 series 4th-generation multifunction digital oscilloscope

ADS3000 Series 4th-Generation Multifunction Digital Oscilloscope

Superior Performance
+ Based on the OWON X-Vision II advanced architecture: lower noise, higher storage, faster refresh.
+ 100M storage depth, up to 500,000wfms/s waveform refresh rate, ensuring clear signal capture.
+ Vertical accuracy is 500uV/div-10 V/div, and time base range is 500 ps/div-1000s/div.
+ 1M- point FFT analysis ensures accurate frequency component display.
Android Based,Extensive Expandability
+ Built-in microphone and speaker, with support for external devices like mouse and keyboard, greatly enhancing efficiency.
+ Enhanced file management for easier viewing, editing, and exporting.
+ Optional wireless module (Wi-Fi/Bluetooth) supports FTP, network printers, mobile hotspots, and more.
Comprehensive Features
+ Integrates oscilloscope, dual-channel 50MHz AFG (optional), frequency counter, voltmeter, FFT spectrum     analyzer and protocol analyzer.
+ Multi triggering: edgevideo,pulse width,slope,under amplitude,over amplitude, timeout, Nth edge, logic,
  and RS232/UART, 12C, SPI, CAN, LIN;
+ Waveform cloning and Bode plot functions (AFG models).
+ Enhanced FFT and ZOOM features provide clearer waveform display and cursor information.
+ Convenient measurement statistics,with measurement indicators,cursor gating,and more measurement       prompts.
Human-machine Interaction and Design
+ Ultra-thin design at just 10 cm, saving valuable workspace.
+ 10.1-inch touchscreen with multi-touch support for an enhanced interactive experience.
+ Multi-touch gestures, and customizable shortcuts for easier use.

Send Inquiry
Support
Product Details





Specifications

Model

ADS3102

ADS3202

ADS3352

ADS3502

Bandwidth (-3 dB)

100MHz

200MHz

350MHz

500MHz

Channel

2+EXT

Sample Rate

2.5 GSa/s (single channel) 1.25 GSa/s (dual channel)

 

Model

ADS3104

ADS3204

ADS3354

ADS3504

Bandwidth (-3 dB)

100MHz

200MHz

350MHz

500MHz

Channel

4 + EXT

Sample Rate

2.5 GSa/s (single channel) 1.25 GSa/s (dual channel) 1.25 GSa/s (full channel)

 

Acquire mode

Sample, Peak, High Res, Average

Record Length

100M

Waveform Refresh Rate

Max 500,000 wfms/s 

Vertical Resolution

8bits

Scanning speed (S/div)

500μV/div - 10 V/div

Sampling rate range

0.05 S/s~2.5 GS/s

DC Gain Accuracy

4%(≤1mV)3%(≥2 mV)

Relay time accuracy

±1 ppm(typical)

Input Impedance

1 MΩ ± 2%, parallel with 15pF ± 5pF, 50Ω ± 2%

Probe attenuation coefficient

1μX-1MX, step by 1-2-5, support custom

Trigger type

Edge, Video, Pulse, Slope, Runt, Windows, Timeout, Nth, Logic, RS232/UART, I2C, SPI CAN, LIN

Bus Decoding (optional)

UART, I2C, SPI, CAN, LIN

Auto measurement

Period, Frequency, +Width, -Width, Rise Time, Fall Time, Scr Duty, +Duty,-Duty, Vavg, Vpp, VRMS, Overshoot, Vmax, Vmin, Vtop, CycRms, Vbase, Vamp, Preshoot, Std Dev, +Pulse Cnt, -Pulse Cnt, Rise Cnt, Fall Cnt, Area, Cyc Area,Delay(-),Delay(-), Phase(-), Phase(-), FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF

Waveform Math

+, -, *, /, Intg, Diff, Sqrt, Function operation (Lg / Ln / Exp / Abs / Sine / Cosine / Tan), FFT, FFT rms, User Defined, digital filter (low pass, high pass, band pass, band reject)

Frequency counter

6-digit frequency counter;

Maximum frequency: maximum analog bandwidth of oscilloscope

Voltmeter

Support DC, AC+DCrms, ACrms;Resolution: 4 digits (ACV/DCV)

Arb Waveform Generator (optioanl) Specification

Max frequency output

50MHz Dual

Sample rate

160 MSa/s

Vertical resolution

14 bits

Standard waveform

Sine, Square, Ramp, Pulse, Noise

Arbitrary waveform

Exponential Rise/Fall, Sin(x)/x, Step Wave, and others total 28 built-in waveforms

Arbitrary waveform frequency

1 μHz - 10 MHz

Arbitrary waveform length

2-16K points

Amplitude

2mVpp - 10Vpp (high impedance), 1mVpp - 5Vpp (50 Ω)

Modulation

AM, FM, PM, FSK, Sweep and Burst

Other

Communication Interface

HDMI, USB device x1, USB Host x3, Trig Out (P/F), Type-C power supply*, LAN

Display

10.1 inch (1024×600), LCD

Power

100V – 240 VACRMS, 50/60 Hz, CAT Ⅱ

Dimension (WxHxD)

325mm x 209mm x 111.5mm

Weight (without package)

≈3.2kg

*The external power bank must meet 12V/4A output.

Accessories

The accessories subject to final delivery.

  • Power Cord
  • Quick Guide
  • USB Cable
  • Probe
  • Probe Adjust
  • Q9 (optoinal)
Inquiry
* Your Name :
Company Name :
* E-mail :
* Phone:
* Country :
   Address :
Product Serial No. :
* Comment :
* Confirmation Code :
Refresh